Machinery

BOART DB 505

Weight 2.9 tonnes
Height when working 4.5 m
Dimensions when travelling 3.6 m long, 0.78 m wide by 1.8 m high.

The tracks of the rig can then be widened to 1.2m for added stability when working or traversing uneven ground.
A standard doorway is 0.8m wide.

BOART DB 520 RIG

Weight 6.2 tonnes
Height when working ca 7.4 m extendable to 7.8 m
Dimensions when travelling 7.5 m long, 2.15 m wide by 4.2 m high.

COMPRESSOR - Two wheeled fast tow compressor 5.6 tonnes gross
LANDROVER - Weight 3.5 tonnes
Dimensions 4.8 m long, 1.8 m wide by 2.4 m high.
SAFETY NOTE - Material can be projected from the borehole some considerable distance and come into contact with overhead power lines.

COMPETITOR 150/130 RIG

Weight 0.67 tonnes
Height when working 3.5 m
Dimensions when travelling 2.7 m long, 1.0 m wide (with baskets) by 1.8 m high.

LANDROVER - Weight 3.5 tonnes
Dimensions 4.8 m long, 1.8 m wide by 2.4 m high.
TRAILER - (Competitor 150/130 is stored inside this box trailer.)
Dimensions 4.9 m long, 1.8 m wide by 2.3 m high.

JCB 3CX

Weight approx 8.1 tonnes
Cab Height approx 2.91 m
Arm height stowed 3.61m
Maximum height of arm 6.35m
Length 5.62m
Width 2.24m
Maximum ground reach 7.87m

Javelin MkII Geothermal Loop Tester

Weight 33 tonnes fully loaded.
Dimensions when travelling 10.3 m long, 2.6 m wide by 3.9 m high.
Extendable flood lights 7.5 m high when extended

This vehicle is utilised to pressure test the Geothermal loops which are inserted into boreholes which are typically 85 to 150m deep. The water tank holds 10,000 l. The ancillary tank, for the geothermal loop solution holds an additional 1,200 l.

The vehicle is powered by a GM Detroit Turbo Charged V12 Diesel Engine.

Vehicles turning circle 25.5 m.
Maximum pumping rate 454 l/min

BOART DB520 – MOUNTED ON MOROOKA MST 2000

Weight 15000kg (approx)
Height when working 8.5m to 9m
Height when travelling 3.2m
Width 2.70m
Length 7.55m
Mounted on Morooka MST 2000

Comacchio Geo 205 Drilling Rig

Travelling width 1.0m
Travelling length 4.5m
Travelling height 2.1m
Working height 4.5m
Working width 2.0m
Weight 2600kg

This rig is track mounted with rubber cleats.

DANDO 250 County Tractor

Interlocking guard designed and fitted by Raeburn Drilling & Geotechnical Ltd

Dimensions when travelling

Width 2.60m
Length 11.60m
Height 4.10m
Unlaiden weight 15 tonne

HANDS ENGLAND HE50 INTERLOCKING GUARD

Weight 8.5 tonnes loaded
Height when working ca 5.5 m extendable to 7.5 m
Dimensions when traveling 6 m long, 2.6 m wide by 2.5 m high.

COMPRESSOR - Two wheeled fast tow compressor 5.6 tonnes gross
LANDROVER - Weight 3.5 tonnes
Dimensions 4.8 m long, 1.8 m wide by 2.4 m high.

HYDREQ GRYPHON

Weight 19 tonnes loaded
Height when working ca 12 m
Dimensions when traveling 10.5 m long, 2.7 m wide by 4 m high.

COMPRESSOR - Two wheeled fast tow compressor 5.6 tonnes gross
LANDROVER - Weight 3.5 tonnes
Dimensions 4.8 m long, 1.8 m wide by 2.4 m high.

CRAELIUS DRILLING RIG

Fitted with an Interlocking Guard Mounted on a Same Tractor

Weight approx 3 tonnes fully loaded
Height when working approx 5.7 m
Length 5.7m
Width 2m

SOILS RIG & SUPPORT VEHICLE

Weight 1.5 tonnes
Height when working 6.7 m
Dimensions when travelling 8.2 m long, 1.82 m wide by 1.8 m high.

When working the footprint is 2.5 m wide by 5 m long. These dimensions will vary slightly depending on how level the site is. An additional area approximately the same size as the footprint will be required for storage and operating space.

DANDO MULTITEC 10 RIG

Weight 17 tonnes gross
Max height when working ca 8 m (Levelling Jacks and mast dump can add 2m)
Dimensions when travelling 9.9 m long 3.36 m wide by 3.4 m high.

DANDO TERRIER 2000 RIG

Weight 1.3 tonnes
Height when working 2.4 – 2.9 m
Dimensions when travelling 2.7 m long, 0.8 m wide by 1.5 m high.

Also see our other Capabilities information.